RS 5.0 HYBRID Three-phase

FEATURES

  • Plug & play installation
  • Maximization of selfconsumption
  • Natural convention
  • Max DC power 150% overload
  • 2 MPPT and up to 3 strings
  • Parallelable inverters for up to 9 units
  • Integrated backup module
  • Remote monitoring with APP and WEB portal
  • Maximum storage capacity for each battery module 5.3 kWh
  • Possibility of increasing the storage power as the system grows
  • From a minimum of 4 (3) to a maximum of 10 modules that can be installed for each inverter for a total capacity of 53 kWh
  • Batteries with Lithium Ion or Lithium-Iron-Phosphate technology
Category:

Description

Storage Solution RS Hybrid Three-Phase with Riello Solartech batteries which combines intelligent energy management and energy storage with constant monitoring of photovoltaic production in a single product.

The RS Hybrid Three-Phase hybrid storage system 5.0 (ESS – Energy Storage System) is designed to continuously supply energy to the loads connected to it using, depending on the different power supply situations, photovoltaic energy, mains power and/or energy accumulated in dedicated battery modules. In the event of a lack of sunlight, high energy demand or blackouts, the energy stored in the system can be used to meet energy needs at no additional cost. Furthermore, the energy storage system helps to pursue the goal of energy self-consumption and energy independence.

The three-phase hybrid solution is designed mainly for commercial and industrial projects but can also be used in residential applications.

RS Hybrid 5.0 three-phase, has a design that combines aesthetics with safety, installation functionality and maintenance. These inverters are high-performance and reach a maximum European efficiency close to 98%.

If used in combination with Riello Solartech batteries of the appropriate size, reduces minimum withdrawal from the networkensuring economic savings in a short time and the improvement of the degree of autonomy from one’s network manager. Therefore, in environmental sustainability, make the most of system means reducing energy withdrawals from traditional fuels to a minimum, consequently reducing CO2 emissions.

Batteries require an HV-RS BOX battery management unit to coordinate the energy in the battery to flow to and from the inverter.

 

Monitoring


  • Riello PV APP

     


  • Cloud Inverter WEB platform

     

Download

Brochures and data sheets

Product data sheets

Technical specifications

MODEL 5 kW
EFFICIENCY
Maximum efficiency [%] (PV to grid) 97.1
Maximum charge/discharge efficiency [%] 96.5
PV INPUT
Maximum input voltage [V] 1000
Maximum DC power [W] 9000
Maximum input current [A] 15 / 15
Maximum short-circuit current [A] 20 / 20
MPPT operating voltage range [V] 160 ÷ 950
Maximum number of PV strings 2 (1/1)
Number of MPPTs 2
BATTERY INPUT
Compatible battery type Lithium ions
Nominal battery voltage [V] 250 - 600
Accepted battery voltage range [A] 150 (130) - 600
Maximum charge/discharge current [A] 25 / 25
Maximum charge/discharge power [W] 9000 / 5800
NETWORK SIDE OUTPUT (On Grid)
AC active power (nominal) [W] 5000
Maximum AC apparent power [VA] 5500
Maximum active power AC (PF=1) [W] 5500
Maximum current AC output [A] 3*8.3A
Nominal AC voltage [V] 380 / 400 / 415V, 3W+N+PE
Nominal grid frequency [Hz] 50 / 60
Mains frequency range [Hz] 45-55 / 55-65
Harmonic distortion (THDi) [%] <5 (nominal power)
Power factor >0.99 nominal power (adjustable 0.8 inductive – 0.8 capacitive)
EPS OUTPUT (Backup)
AC active power (nominal) [W] 5000
Maximum power [VA] 5500
Maximum power [VA] (10 sec.) 7500
Intervention time [msec.] 10 (typical), 20 (maximum)
Nominal AC voltage [V] 380 / 400, 3W+N+PE
Harmonic distortion (THDi) [%] <3 (R Load), 8 (RCD Load)
PROTECTIONS
PV disconnect switch Support
Anti-islanding protection Support
AC overcurrent protection Support
AC short circuit protection Support
AC overvoltage protection Support
Surge Protection Type (SPD) DC Type II , AC Type III
Differential Protection (GFCI) Support
Insulation detection (R-ISO) Support
GENERAL
Typology Transformer-free
Degree of protection IP65
Cooling down Natural cooling
Operating temperature range [°C] -25 ÷ 60
Relative humidity range [%] 0 ÷ 100
Maximum operating altitude [m] 4000 (>2000 derating)
Noise [dB] (@ 1m) <30
Dimensions (WxDxH) [mm] 550x212x530
Weight [kg] 30
COMMUNICATION
Display APP (Bluetooth) + LED
Communication Wi-Fi; BMS (CAN/RS485); CT sensors; RS485; Ethernet (optional); METER (optional)
Monitoring APP, Supervision portal
CERTIFICATIONS
Safety IEC/EN 62109-1: 2010, IEC/EN 62109-2: 2011
EMC EN IEC 61000-6-1/2/3/4
Network connection regulations CEI 0-21:2022; CEI 0-16:2022 - UNE 217002: 2020/RD647:2020/RD244:2019/RD1699: 2011/RD661: 2017/RD413: 2014 - NTS Version 2.1/UNE 217001: 2020
Warranty 5 years

Technical specifications Batteries

MODEL RS BATLIO 5300T
ELECTRICAL CHARACTERISTICS
Battery Type LFP (LiFePO4)
Nominal battery voltage [Vdc] 51.2
Minimum battery voltage [Vdc] 45.5
Maximum battery voltage [Vdc] 58.4
Battery module energy [kWh] 5.3
Battery module capacity [Ah] 105
Usable battery capacity [Ah] 100
Maximum number of batteries in series [Pcs] 10
Maximum charging current [A] 100 (150 for 30 sec.)
Maximum discharge current [A] 100 (150 for 30 sec., 200 for 5 sec.)
LIFE CHARACTERISTICS
Life cycles >8000 (@80% DoD, 25 °C)
Depth of Discharge (DoD) Up to 100%
Self-discharge percentage 1% / month (@ STC 25 °C) <3% month (@ STC -10 °C / +45 °C)
Maximum lifespan 10 years (@25 °C, periodic checks)
CONNECTION
Communication protocol with HV-RS BOX CAN, RS232 (reserved)
SAFETY
Functionality Pre-charge, HV fuse, Multi firmware management of the BMS, Automatic contactor (contactor).
Certifications EN IEC 61000-6-1:2019, EN IEC 61000-6-2:2019, EN IEC 61000-6-3:2021, EN IEC 61000-6-4:2019 (EMC), IEC 62619 (CB), CE , UN38.3
GENERAL
Weight [Kg] 51
Dimensions (WxDxH) [mm] 580x474x170
IP protection grade IP20 (indoor use only)

HV-RS BOX technical specifications

MODEL HV-RS BOX
CHARACTERISTICS
Operating voltage [Vdc] 80-750
Number of entries 1+1
Maximum input current [A] 100 (50 for input)
Maximum discharge current [A] 100
Active safety protection [A] 150
Passive safety protection 200 A - 750 Vds
Manual main disconnect switch 125 A / 1000 Vdc
Temperature range 0 - 45 °C
Storage temperature -10 °C / +55 °C
Maximum number of batteries 10
Communication protocols CAN, Wi-Fi, Bluetooth, RS232
Weight [Kg] 18
Dimensions (WxDxH) [mm] 580 x 474 x 170
IP grade IP20 (indoor use only)
Certifications EN IEC 61000-6-1:2019, EN IEC 61000-6-2:2019, EN IEC 61000-6-3:2021, EN IEC 61000-6-4:2019, EN IEC 62368, CE

Related products